Contact us for kit sizes/pricing larger than 6 gallons.
info@graphitemaster.com
Kwik Kick curing agent is a low color, low viscosity modified cycloaliphatic amine intended for ambient or low temperature curing of liquid epoxy resins. The KK System gives high gloss, high strength films that are resistant to a variety of chemicals. These properties make it ideal for use in sports equipment, floorings, maintenance coatings, tank linings, and secondary containment linings. It’s very low color and good color stability and fast set times make it appropriate for numerous production applications.
Resin Research
Resin
- Color
- Cure Speed
- Kit size
- CE Ultra - Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 3 Pint Kit
- CE Ultra - Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 3 Quart Kit
- CE Ultra - Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 1.5 Gallon kit
- CE Ultra - Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 3 Gallon Kit
- CE Ultra - Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 6 Gallon Kit
- XB - Extra Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 3 Pint Kit
- XB - Extra Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 3 Quart Kit
- XB - Extra Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 1.5 Gallon kit
- XB - Extra Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 3 Gallon Kit
- XB - Extra Bright with UV Block and Optical brightener. Recommended for white boards only. / Kwik Kick / 6 Gallon Kit
Project 21 Resins
- 1980 - is the stiffest, highest modulus resin in the group. It is generally used in carbon fiber composites where it's elongation best matches that fiber
- 2000 - is used in high modulus carbon, aramid and S and/or E fiberglass applications. It's elongation matches well with all of these fibers.
- 2020 - Is used in composites which require good stiffness and impact strength. This products elongation matches well with fiberglass, natural fiber and synthetic fabrics.
- 2040 - is our best for impact loads. It's long elongation in most cases make a composite that will be nearly free of the tendency to crack upon impact. It matches well with E glass, synthetic and natural fiber fabrics.
Project 21 Hardeners
Project 21's three hardeners. While the four resins above control the structural qualities of your finished product these hardeners control your processes, i.e, work time, cycle times, work flow, etc.
- 2100F - Fast hardener with a pot life of 18 minutes and sets in 2 to 3 hours
- 2100S - Slow hardener with a pot life of 40 minutes and sets in 4-6 hours
- 2100X - Extra Slow with a 160 minute pot life and sets in approximately 12 to 16 hours.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
